Name: RF RGB LED Touch Controller
Model: CT-T1RGB
Input voltage: 12-24VDC
Output power: 144W/288W
Output: 3 channels
Output current: 4A per channel
Connecting mode: common anode
Static power: <1W
Touch remote:
1.working temperature: -20-60��
2.power supply mode: AAA*3 battery
3.supply voltage: 4.5V
4.static power consumption: 0.015mW
5.standby current: 3uA
6.emission current: 10mA
7.remote distance: 20m
8.standby time: 6 months
General feature:
1. Under the control of wireless, the effective remote control distance is about 20 meters.
2. 3 channels, 4A maximum for each channel with max 288W output at 24VDC;
3. Touch-button, ultrathin, light, protable;
4. Touch-key count up to 64, up to 64 kinds of mode function, small volume, more key funcation;
5. Easy to use, have color pulley touch screen, all sorts of design and color mode at a glance, can a single point also can continuous touch to realize color mode select, users can speedily choose the needed color, and the static and dynamic mode can change freely;
6. Auto dormancy function, the remote control is without buttons state more than 20 seconds, remote will automatic enter the standby state, realize save electricity, extending battery life;
7. Soft ON/OFF and pause switch.
Controller mode:
Mode number | Function | Remark |
1 | Static red | brightness adjustable, Speed unadjustable |
2 | Static green | |
3 | Static blue | |
4 | Static yellow | |
5 | Static purple | |
6 | Static blue-green | |
7 | Static white | |
8 | Three color jumpy changing | Speed adjustable, brightness unadjustable |
9 | Three color gradual changing | Speed adjustable, brightness unadjustable |
10 | Seven color jumpy changing | Speed adjustable, brightness unadjustable |
11 | Seven color gradual changing | Speed adjustable, brightness unadjustable |
Remarks:
1.Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;
2.Power supply voltage range is DC12-24V, more than voltage range maybe will burnout the controller.
3.Touch remote when not use for a long time, suggest to take down the battery.
4.Power supply management: stop to use the remote more than 20s, the remote will enter the standby state (untouchable state), to extend the battery life; slightly shake once, then the remote will come back to the normal working state (touchable state).
RGB LED Touch Controller Manufacturer,Supplier&Factory Manufacturer search on:Google, Yahoo, Msn