Wireless Synchronization RGB LED controller

Master Synchronization RGB LED controller technical parameters:
Model: CT400
working temperature: -20-60��
supply voltage: DC 12V-24 V
grey grades :256
output: 3 channels
connection mode: common anode
external dimension: L126��W65��H30mm 
static power consumption: <1W
output current: <4A( each channel )
output power: 12V:<144W, 24V:<288W  

Slave RGB Controller Frequency Selection DIP Function:.
Allocated a total of 4 yards,choose the operating frequency of 15 files.Sub-controller's output mode and its frequency will be the same with the master controller of the output mode synchronization.The different frequencies of the main controller will not interfere with each other.

Slave Controller Mode selection DIP Function:
A total of 10 DIP, DIP switch on the screen for the dial code number, and screen printing on the cover is pressed the corresponding DIP-bit value represented by (used for the gradient and the jump time The speed selection).The speed value is that all the allocated codes according to the corresponding bit value of and.In the static mode, press the dial code if more than the same time, only a small number DIP DIP represents an effective model.Controller, each controller can either call the shots and can be done from the controller,the
switching function dial code by the tenth to achieve.When the tenth DIP did not press (OFF), the main control mode, and vice versa shall be from the control mode.

Direction for Use
1. Automatically complete change after turning on the power,need not any setting; Please ensure short circuit can not occur between connecting wire before you turn on the power;
2. sub-controllers around should be arranged around the main controller;
3. the effective range of the controller work and work environment related to the effective working distance indoors is 20 to 50 meters, the environment is open, the effective distance farther.